 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
Installing a Distribution Set
I chose to install everything using the "All" option since I
had the hard drive space. If you're concerned about space, consider the other distribution options.
The selection is made using the arrow keys to highlight the item and pressing the space bar. Make sure [OK]
is highlighted and then press enter to continue.
|
|
|
|
Choose Distributions
As a convenience, we provide several "canned" distribution sets. These select what we consider to be the most reasonable defaults for the type of system in question. If you would prefer to
pick and choose the list of distributions yourself, simply select "Custom". You can also pick a canned distribution set and then fine-tune it with the Custom item.
Choose an item by
pressing [SPACE]. When you are finished, choose the Exit item or press [ENTER].
[ ] 1 Developer Full sources, binaries and doc but no games
[ ] 2 X-Developer Same as above, but includes the X Window system
[ ] 3 Kern-Developer Full binaries and doc, kernel sources only
[ ] 4 User Average user - binaries and doc only
[ ] 5 X-User Same as above but includes the X Window System
[ ] 6 Minimal The smallest configuration possible
[ ] 7 Custom Specify your own distribution set
[X] 8 All All sources and binaries (incl X Window System)
9 Clear Reset selected distribution list to nothing
<<< 0 Exit Exit this menu (returning to previous)
[OK] Cancel
[ Press F1 for Information on these options ]
|
|
|
|
Encryption Method
|
|
|
|
User Confirmation Requested
Do you wish to install DES cryptographic software?
If you choose No, FreeBSD will use an MD5 based password scheme which, while perhaps more secure, is not interpretable with the traditional
UNIX DES passwords on other Non-FreeBSD systems.
Please do NOT choose Yes at this point if you are outside the United States and Canada yet are installing from a U.S. FTP server. This will violate
U.S. export restrictions and possibly get the server site into trouble! In such cases, install everything but the DES distribution from the U.S. server then switch your media type to point to an international FTP
server, using the Custom installation option to select and extract the DES distribution in a second pass.
[ Yes ] No
[ Press F1 to read the XFree86 release notes for FreeBSD ]
|
|
|
|
Although I wasn't sure, this sounded like a good idea from a compatibility standpoint and I live within the U.S., so I proceeded with it.
|
|
|
|
Select the encryption facilities you wish to install
Please check off the any special
DES-based encryption distributions you would like to install. Please note that these services are NOT FOR EXPORT from the United States. For information on non-U.S. FTP distributions of this software,
please consult the release notes.
[X] des
Basic DES encryption services
[ ] krb Kerberos encryption services
[ ] sebones
Sources for eBones (Kerberos)
[ ] ssecure Sources for DES
<<< Exit Exit this menu (returning to previous)
[OK] Cancel
|
|
|
|
Ports Collection
|
|
|
|
User Confirmation Requested
Would you like to install the FreeBSD ports collection?
This will give you ready access to over 1000 ported software packages, though at a cost of around 35MB of disk space when
"clean" and possibly much more than that if a lot of the distribution tarballs are loaded (unless you have the 4th CD from a FreeBSD CDROM distribution available and can mount it on /cdrom, in which case
this is far less of a problem).
The ports collection is a very valuable resource and, if you have at lease 100MB to spare in your /usr partition, well worth having around.
For
more information on the ports collection & the latest ports, visit: http://www.freebsd.org/ports
[ Yes ] No
|
|
|
|
The installation program doesn't check to see if you have adequate space. Don't select this option unless you have *plenty* of hard disk space. The ports can be added as needed later.
|
|
|
|
The install program returns to the Choose Distributions screen. You may get confused here if you don't remember to use the down arrows to select "EXIT" since the screen isn't large enough to display the
entire menu.
|
|
|
|
Choose Distributions
As
a convenience, we provide several "canned" distribution sets. These select what we consider to be the most reasonable defaults for the type of system in question. If you would prefer to pick and choose the
list of distributions yourself, simply select "Custom". You can also pick a canned distribution set and then fine-tune it with the Custom item.
Choose an item by pressing [SPACE]. When
you are finished, choose the Exit item or press [ENTER].
[ ] 1 Developer Full sources, binaries and doc but no games
[ ] 2 X-Developer Same as above, but includes the X Window system
[ ] 3 Kern-Developer Full binaries and doc, kernel sources only
[ ] 4 User Average user - binaries and doc only
[ ] 5 X-User Same as above but includes the X Window System
[ ] 6 Minimal The smallest configuration possible
[ ] 7 Custom Specify your own distribution set
[X] 8 All All sources and binaries (incl X Window System)
9 Clear Reset selected distribution list to nothing
<<< 0 Exit Exit this menu (returning to previous)
[OK] Cancel
[ Press F1 for Information on these options ]
|
|
|
|
Installation Media
|
|
|
|
Choose Installation Media
FreeBSD
can be installed from a variety of different installation media, ranging from floppies to an Internet FTP
server. If you're installing FreeBSD from a supported CDROM drive then this is generally the best
media to use if
you have no overriding reason for using other media.
1 CDROM Install from a FreeBSD CDROM
2 FTP Install from an FTP server
3 FTP Passive Install from an FTP server through a firewall
4 DOS Install from a DOS partition
5 NFS Install over NFS
6 File System Install from an existing filesystem
7 Floppy Install from a floppy disk set
8 Tape Install from SCSI or QIC tape
9 Options Go to the Options screen
[ OK ] Cancel
[ Press F1 for Information on these options ]
|
|
|
|
Final Warning
|
|
|
|
User Confirmation Requested
Last Chance! Are you SURE you want to continue the installation?
If you're running this on a disk with data you wish to save then WE STRONGLY ENCOURAGE YOU TO MAKE PROPER BACKUPS before
proceeding!
We can take no responsibility for lost disk contents!
[ Yes ] No
|
|
|
|
CAUTION: This is the point of no return. Selecting "No" will allow you to exit and no changes will be made to the system. Selecting "Yes" and pressing enter will proceed with the installation.
|
|
|
|
Configure Network Devices
|
|
|
|
User Confirmation Requested
Would you like to configure Ethernet or SLIP/PPP network devices?
[ Yes ] No
|
|
|
|
Network interface information required
If you are using PPP over a serial
device, as opposed to a direct ethernet connection, then you may first need to
dial your Internet Service Provider using the ppp utility we provide for that purpose. If you're using SLIP over a serial
device then the expectation is that you have a HARDWIRED connection.
You can also install over a parallel port using a special "laplink" cable to another machine running a fairly recent
(2.0R or later) version of FreeBSD.
ed1 WD/SMC 80xx; Novell NE1000/2000; 3Com 3c503 card
lp0 Parallel Port IP (PLIP) peer connection
sl0 SLIP interface on device /dev/cuaa0 (COM 1)
ppp0 PPP interface on device /dev/cuaa0 (COM 1)
sl0 SLIP interface on device /dev/cuaa1 (COM 2)
ppp0 PPP interface on device /dev/cuaa1 (COM 2)
[ OK ] Cancel
[ Press F1 to read network configuration manual ]
|
|
|
|
Network Configuration
Host: Domain:
yf-12.defcon1.org yf-12.defcon1.org
Gateway: Name Server :
192.168.0.1 192.168.0.5
Configuration for Interface ed1
IP Address: Netmask :
192.168.25 255.255.255.0
Extra options to ifconfig:
[ OK ] Cancel
[ Select this if you are happy with these settings ]
|
|
|
|
Host: Your fully-qualified hostname, e.g. foo.bar.com
Domain The name of the domain that your machine is in, e.g. bar.com
Gateway IP address of host forwarding packets to non-local destinations
Name server: IP address of your local DNS server
IP address The IP address to be used for this interface
Netmask: The netmask for this interface, e.g. 0xffffff00 for a class C network
Extra options to ifconfig: Any interface-specific options to ifconfig you would like to add
|
|
|
|
User Confirmation Requested
Would you like to BRING THE ED1 INTERFACE UP RIGHT NOW?
[ Yes ] No
|
|
|
|
Configure Gateway
|
|
|
|
User Confirmation Requested
Will this machine
be an IP gateway (e.g. will it forward packets between interfaces)?
[ Yes ] No
|
|
|
|
Answer "No" here
|
|
|
|
This machine is not my gateway (192.168.0.1) machine which connects to the internet and forwards packets between other machines on the local network.
If this machine is to connect to an internet service
provider, then it will need to be designated as a gateway.
|
|
|
|
GhostRdr v1.0
|
|
|
|
Email Us
|
|
|
|
ghostrdr@defcon1.org
|
|
|
|
This site cannot be duplicated without permission
|
|
|
© 1998 - 2010 Defcon1, www.defcon1.org. Copyrights for all materials on this web site are held by the individual authors, artists, photographers
or creators. Materials may not be reproduced or otherwise distributed without permission of www.defcon1.org and the content's original author.
|
|
